RO water filter system description:
It adopts current advanced RO system, the output water is good for drinking directly.
Water source: TDS< 3000PPM
Raw water quality: Tap water/Well water
Output water quality: standard pure water
Production capacity: 10000L/H
Recovery rate: >75%
System specific
Machine working time: 24 hour
Water supply condition: Continuous water supply
Operation: This system adopts the interlocking control part of the automatic operation
Scope of design: From the raw water to pure water equipment outlet device
System configuration
Water quality of pretreatment system: Consists of quartz sand filter, activated carbon filter, the pp security filter;
Fine filtration system: Consists of HYDE reverse osmosis device
Counter-part systems: Electric control system composition.
Water treatment system for peripheral basic setup requirements
Power supply: 220V 50HZ 1 phase or according to client requirements do it.
Working process:
Source water pump Quartz Sand Filter Active carbon filter pp security filter 10000L/H RO membrane system USE Water point
RO device:
Reverse osmosis membrane is the heart of the system, design reasonable or not directly depends on not only mature RO system can meet the design requirements, and related to the service life of reverse osmosis membrane, water, treated by reverse osmosis unit can remove bacteria and organic matter, microorganism. RO device without phase transition in the process of water separation,recovery rate is high, the device is small in size, automatic operation, applicability, wide scope of application, no environmental pollution,etc, this system adopts the reverse osmosis membrane system, can purify the water particles, organic matter, etc, to the water quality pure water standard.
Control introduce:
This system for automatic operation, in the condition of automatic interlock control system. Automatic control, according to the situation of this system, the pretreatment of source water pump and RO system appropriate USES centralized control, the controller mainly done all kinds of monitoring, parameter setting, etc. Each unit equipment are equipped with the corresponding artifacts instrumentation and monitoring instrument, has self diagnosis ability. Devices using interlocking protection, the safe running of the equipment.
