HOME 首页 > Bottle blowing machine > PET Preform/Caps/bottles mould
GF-IM-B1
Greenforest
Wooden case
China
1
Email to us:greenforestdaisy@vip.163.com电话:+ 86-25-52423559| Injection unit | Unit | GF-IM-B1-PVC | |
| Screw diameter | mm | 40 | 45 |
| Screw L/D ratio | 22.5 | 20 | |
| Swept vloume | cm3 | 285 | 360 |
| Shot weight(upvc) | g | 342 | 432 |
| Shot weight(upvc) | oz | 12.1 | 15.2 |
| Injection pressure | Mpa | 215 | 170 |
| Injection rate | cm3/s | 127 | 161 |
| Plasticzation capacity (upvc) | g/s | 16.7 | 23.7 |
| Maximum screw stroke | mm | 225 | |
| Maximum screw speed | rpm | 150 | |
| Clamping unit | |||
| Clamping force | kN | 1600 | |
| Opening stroke | mm | 480 | |
| Space between tie-bar (HxV) | mm | 510 X 460 | |
| Maximum mould height(T-slot) | mm | 200(165) | |
| Minimum mould height(T-slot) | mm | 530(495) | |
| Maximum daylight | mm | 1010(975) | |
| Ejector stroke | mm | 150 | |
| Ejector force | kN | 45 | |
| Number of ejector pin | pc | 5 | |
| Power unit | |||
| System pressure | Mpa | 16 | |
| Pump motor | kW | 21 | |
| Heating capacity | kW | 11 | |
| Number of heating zones | 3+1 | ||
| Number of cooling fans | 2 | ||
| Others | |||
| Oil tank capacity | L | 220 | |
| Machine dimension(LxWxH)(Apr.) | m×m×m | 4.9 x 1.7 x 1.9 | |
| Machine weight(Apr.) | Ton | 4.8 | |
